Détails sur le produit:
Conditions de paiement et expédition:
|
| Nom: | Appareil pour l'essai de résistance mécanique sur des couvertures élastiques | Garantie: | 1 an |
|---|---|---|---|
| Standard: | BS1363-1: 2018 clause 9 figure 2 | Application: | Test de résistance mécanique sur les couvercles résilients |
| Force appliquée: | 230-240N | Matériel: | Acier inoxydable |
| Examinez la tension: | 2 000 V ± 60 V 50 Hz | Bloc de bois dur: | Selon BS1363.1-2018 dans la figure 2b |
| Surligner: | 230N Plug Socket Tester,BS1363-1 Plug Socket Test Apparatus |
||
230 - 240N Plug Socket Tester Apparatus For Mechanical Strength Test On Resilient Covers
Standard description:
9.3.1 Conformity shall be checked by the following test (an example of a suitable apparatus is shown in Figure 2).
The design of the apparatus shall be such that a steady force of 240 N can be applied to those places where the possibility of a failure exists, the force being applied through a metal test pressure block as shown in Figure 2a).
Each sample shall be subjected to the force at each chosen place in turn. During each application of force, a test voltage of 2 000 V ±60 V 50 Hz of substantially sinusoidal waveform is applied for 60 s between all live parts bonded together and the metal test pressure block.
During the test no flashover or breakdown shall occur.
After the test it shall not be possible to touch live parts with test 11 of BS EN 61032:1998 applied with a force of 30 N.
Product Introduction:
The device conforms to the BS1363-1:2018 clause 9, figure 2. Resilient accessible external surfaces of socket-outlets shall be so designed and constructed that when assembled and wired as in normal use, there is no risk that, as a result of undue pressure, live parts could penetrate the accessible external surfaces or become so disposed as to reduce creepage and clearances below those given in clause 8.
The design of the apparatus shall be such that a steady force of 230-240N can be applied to those places where the possibility of a failure exists, the force being applied through a metal test pressure block. Plug Socket Tester
Each sample shall be subjected to the force at each chosen place in turn. During each application of force, a test voltage of 2 000 V ±60 V 50 Hz of substantially sinusoidal waveform is applied for 60-65s between all live parts bonded together and the metal test pressure block.
During the test no flashover or breakdown shall occur. Plug Socket Tester
After the test it shall not be possible to touch live parts with test 11 of BS EN 61032:1998 applied with a force of 28-30N.
For more details, Please refer to the relevant standard.
Technical Parameters:
| Applied force | 230-240N |
|
Metal test pressure block |
R angle of 2.0 to 2.5, width of 25.0 to 25.2 |
| Hardwood block | According to BS1363.1-2018 in Figure 2b |
Picture view:
Personne à contacter: Tessa Huang
Téléphone: +8618933919125
Télécopieur: 86-020-31143909-805
